Here are the body components and the rear window mounted spoiler. They were painted with decanted Tamiya aerosol lacquer TS-16, by my good friend, Andrew Birkbeck. I would have painted them myself, but was in my work clothes at the time...

Here's the instrument panel, with the decals applied. I will need to touch the panel-one of the decals is slightly out of register. I will use a technical pen to eliminate the excess white visible on the glovebox.

The interior is molded with the seats integral to the floorpan, which makes masking and painting a challenge. I masked the aluminum (painted with Testors Metallizer non-buffing aluminum) with Tamiya tape, and painted the seats and floorpan Poly-Scale Grim

I painted the inside of the body with Poly-S Grimy black, masked it off, and primed the body with Mr. Surfacer 1200 thinned with Mr.Color thinner. I sprayed several thin coats, and dried the body in my food dehydrator.

Next up will be wet sanding, followed by another primer coat.

Here is the chassis, painted with Poly-S Grimy Black. The exhaust is painted with Tamiya Flat Aluminum. It's glosscoated with Testors lacquer, preparatory for an oil wash to bring out what little detail there is...

The instrument panel was first painted Poly-S Grimy Black, then masked with Tamiya tape. I sprayed Mr. Surfacer again for the light gray.

The instrument has also been painted and gloss coated. Next up is to apply the decals.

The wheels and tires are two pieces, with the disc brakes molded to the inside of each inner wheel/tire half. The discs were painted Tamiya Flat Aluminum. Then the outer halves were painted with Tamiya Flat White. Then I gave them a coat of clear gloss, b